Hi Anita, we will change this from an error to a warning soon. We will propably provide a sil configuration that doesnt need the Python / Josev dependencies in the near future, so this error/warning

Hello Everyone, I am planning to use the Everest framework for DC EV chargers. I am trying to install Everest Framework on Ubuntu 20.04.5. We refer to the documentation given on the below link,

Dear Anita, the config files should be located under /etc/everest/config-*.yaml or /mnt/user_data/opt/everest/etc/everest/config-*.yaml, depending on how you installed it. Best, Anton Am Di., 28.

Dear Serra, thank you for your reply and for bringing this up. I updated the bullseye-toolchain.tgz. Please download and rebuild - it should work now. If not, let us know :) Anton Am Di., 28. März

Dear Anton, Thank you so much for your reply. We successfully solved the config file save problem with your help. Now we are successfully saving the config file into the Admin Panel. So I have created

Hi, Thank you for your response. I am using the most recent one available at here : http://build.pionix.de:8888/release/toolchains/ Best Serra

Hi Serra, we've seen this issue before and it should be fixed in the most recent version of the cross toolchain. Could you check, if you've used the latest bullseye-toolchain.tgz? Thank you! Am Mo.,

Hello everyone, I am trying to move a succesful build into a Raspberry Pi. I cross-compiled with the help of the online guide and everything seemed to be fine, but when I try to simulate a charging

Hi EVeryone, yesterday we had the biggest EVerest release so far! A lot of exciting news! Please find attached the slides and recordings of our last TSC meeting. TLDR: > 50x faster ISO charging,

EVerest Discussion Upcoming Events EVerest Weekly Tech Sync When: Tuesday, March 28, 2023, 10:00am to 11:00am (GMT+02:00) Europe/Berlin Organizer:

Dear Anita, we've seen this before and this is usually due to a timeout if the embedded target is too slow. You can try to adjust the timeout in the file: everest-framework/src/controller/rpc.cpp in

Hi, So I have created my own charger config file using the admin panel. However, I could only access this config file within the admin panel, my question is where is that config saved at? and what's

Dear Anton, Thank you so much for your reply. Now I can connect the terminal of blocks. I have created a config file but when I save that file it gives the below error. Failed to save__config-sil-dc

Hey everyone. I just joined the forum to get some help regarding this problem. Last month I was able to build and use the SIL normally, then I went on vacation and came back last week and I couldn't

EVerest Discussion Upcoming Events EVerest Weekly Tech Sync When: Tuesday, March 21, 2023, 10:00am to 11:00am (GMT+01:00) Europe/Berlin Organizer:

Hi, regarding building for raspberry pi: You can compile natively on raspian if you use the latest release. Don't worry about clang-format version if you just want to compile it. It will however take

Hi Kuldeep, You can find the hardware prerequisites to build the EVerest in this link, however, under 1.3.1 named hardware you can find: It is recommended to have at least 4GB of RAM available to

Hi, I am new to Everest Framework. I want to install Everest Framework on my PC . Which version of Ubuntu shall I install on my PC for smooth working of Everest Framework? I am planning to use Everest

Hi, I am new to Everest Framework. I want to install Everest Framework on my PC . Which version of Ubuntu shall I install on my PC for smooth working of Everest Framework? I am planning to use Everest

Dear Anita, could you please describe in more detail what exactly you are trying to achieve. In order to connect the terminals, you need to select (simple click) one of the terminals (this well then