Re: low level charge controller firmware

Alberto Merciai

Hello Cornelius,

Actually I'm using imx6dl-sabresd evaluation board.
Of course, I can try to bitbake it.


On Thu, Nov 24, 2022 at 10:55 AM Cornelius Claussen via <> wrote:

Hi Alberto,

cross compiling that way should work. The meta-everest layer is quite usable already, it however does not build the java .jar files, so they need to be manually copied in another recipe. Apart from that it should work. 
You can checkout an example yocto bsp based on imx8p here that includes everest automatically:

The everest meta layer is here:

If you are using yocto give it a try. Which board are you using? Maybe we can add support in repo-manifests for that?



Am Do., 24. Nov. 2022 um 10:44 Uhr schrieb Alberto Merciai <alb3rt0.m3rciai@...>:
Hi All,

Ok, I found it in your documentation.

I will do the same by cross compiling then attaching it to a systemd service.


On Wed, Nov 23, 2022 at 1:06 PM Alberto Merciai via <> wrote:
> Hi Alberto,
> Have you purchased any HW evaluation boards for running Everest? If so, could you please share the details.

Hello @Amit, 
I'm trying to organize something with a imx6 custom board and an stm32

Hello @Cornelius,
Thanks for the access.

Do you know if this PLC is compatible with the EVerest SW
I saw that as yours it includes QCA7000 chipset and linux kernel already includes a driver for it, exposing eth interface.
Which is the best way to run EVerest on ARM target architecture, do you cross compile it then you start it as a service or you place it on a docker and deploy it? 
I would like to bitbake the meta layer but is not ready yet, unfortunately : P



On Wed, Nov 23, 2022 at 9:16 AM Marco Möller via <> wrote:
Hi Amit,

regarding HW:
- Phytec + Texas Instruments are currently preparing evaluation boards running with EVerest. 
- off the shelf as of today you could use (basically EVerest evaluation kit with housing)
- or a controller from chargebyte
more to come :-)

ping me if you need further details


Am Mi., 23. Nov. 2022 um 09:03 Uhr schrieb Amit Mukherjee via <>:
Hi Alberto,
 Have you purchased any HW evaluation boards for running Everest? If so, could you please share the details.


Dr. Marco Möller
Geschäftsführer / CEO

Pionix GmbH
Am Mühlgarten 8
76669 Bad Schönborn

Mobile: +49 (0)173 20 51 706

central office: +49 (0)7253 9793480

Amtsgericht Mannheim, HRB 739172
Geschäftsführer: Johanna Claussen, Dr. Marco Möller, Benjamin Mosler

Hinweise zum Datenschutz

Join to automatically receive all group messages.